Owning an electric bike is one of the best investments you can make for your daily commute or weekend adventures. But like any vehicle, your e-bike needs regular care to perform at its best. Follow this simple maintenance guide to extend the life of your Jesrider e-bike and enjoy every ride.
🔋 1. Battery Care — The Heart of Your E-Bike
Your battery is the most important and expensive component of your e-bike. Treat it well:
- Charge after every ride, don't let it drop below 20%
- Store at 50–80% charge if not riding for extended periods
- Keep it away from extreme heat or freezing temperatures
- Use only the original Jesrider charger
⚙️ 2. Motor & Drivetrain
- Clean the chain every 100–200 miles with a dry or wet lubricant depending on conditions
- Check for chain wear every 500 miles and replace when needed
- Inspect the derailleur alignment monthly for smooth gear shifting
- Listen for unusual noises — they're early warning signs

🛞 3. Tires & Brakes — Your Safety First
- Check tire pressure before every ride (refer to your model's recommended PSI)
- Inspect tires for cuts, cracks, or embedded debris
- Test brake response before each ride
- Replace brake pads when thickness drops below 1mm

🔩 4. Frame & Bolts
- Wipe down the frame after every muddy or rainy ride
- Check all bolts monthly — vibration can loosen them over time
- Inspect the frame for cracks, especially around welds
- Apply a light coat of bike polish to protect the finish
💡 5. Lights & Electronics
- Test front and rear lights before every ride
- Keep connectors clean and dry
- Update firmware if your model supports it (check the Jesrider app)
- Inspect wiring for any signs of wear or exposure
📅 Recommended Maintenance Schedule
| Frequency | Task |
|---|---|
| Before every ride | Tire pressure, brakes, lights |
| Monthly | Bolts, chain lubrication, battery check |
| Every 500 miles | Chain wear, brake pad thickness |
| Annually | Full professional service |
🛠️ When to See a Professional
While most maintenance can be done at home, visit a certified e-bike technician for motor diagnostics, brake bleeding (hydraulic), electrical issues, and annual full inspections.
Ride smart, ride safe — and enjoy every mile on your Jesrider.